(TESTED ON NOKIA 6600 )
Now after installing you will have to do some settings in the appplication.
1. Deactivate all the options in mRouter (at least one of the Bluetooth COM ports)
2. Now goto Bluetooth settings and Deactivate everything else in Local services Bluetooth serial port, note the com port you set as bluetooth serial port
3. Goto Phone and Modem options, Go to “Modems” click add new modem , now select “I will select it from a list” Select “Communications cable between 2 Computers” from the list (in Standard Modem Types)
4. Now select the COM port (same from step3 ). In the modem settings set maximum port speed to 115200 > Goto Network Connections and create a new connection (wizard)5. Select Set up an advanced connection > NextAccept incoming connections -> Now Check the Communications cable between two computers (LAN) > NextDo not allow VPN connections -> Now select a username which you want to give access to your pc over Bluetooth (that’s the username you will set on the phone later) > Next Select Internet Protocol -> Properties, select “TCI/IP address assignment” and set the IP range to something like 10.0.2.2-10.0.2.254
6. Remove Internet Connection Sharing from all interfacesrun cmd.exe and enter the following commands:
netsh routing ip nat installnetsh routing ip nat add interface "YOUR LAN INTERFACE NAME" fullnetsh routing ip nat add interface Internal private
YOUR LAN INTERFACE NAME has to be replaced with the name of the interface connected to the internetif there is a “Bluetooth Network” connection in Network Connections delete itIn network connections choose the incoming connection just created, and open its properties.** on the users tab, select the last checkbox which says “Always allow directly connected devices to such as palmtop computers to connect without using a password” So, that’s the setup on the PC.
Next Come to Mobile :
Download gnubox6600.SIS and install it on your phone. Create a new Access Point on the phone (Setting> Connection > Access points > New access point> Use default settings). Use the following settings for setup : Name: Bt (This name is important, the gnubox software will look for it, since its hard-coded in the code) Data Bearer: High speed (GSM)Dial-up number: e.g. 2222. It doesn’t matter what you have here as long as it’s not empty Username: the username you gave access to the incoming connection earlierPrompt password: NoPassword: Password for the user on WindowsAuthentication: NormalAdvanced Settings: Use Login Script YesAdvanced Settings: Login Script
CHARMAP [windows-1252]LOOP 10{SEND “CLIENT”+<0×0d>WAIT 3{“SERVER” OK}}EXIT KErrNoAnswer$
OK:EXITBe careful that you get it exactly as show here, including line breaks. You could save it to a file, send to the phone and copy-paste to the settings.
Advanced Settings: Use PPP Compression YesRun the program you installed at step1 (gnubox)Inside gnubox: Options-> 2box Direct -> Bluetooth, select your computer, leave gnubox running in backgroundRun the nokia wml browser select “Bt” as access point and connect.You can also use any other internet app like Agile messenger, real player, opera, profimail etc
